Greenspec catalog April 15, 2021
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Greenspec catalog April 15, 2021
Main electronic boards from Greenspec
new code description
1001.1 AFP 02 20 in/20 out,
Our standard I/O board, with
20 output with relays
10 analog inputs, to be used as 4-20 mA, 0-3 V, 0-10V
6 digital inputs
4 counter inputs
Power supply 110V/220V AC
1100.1 AFP03 OUT 63 Relays
For installations with large fertilizer unit with many outputs an economical unit with 63
outputs with relays
Also often used for control of lights
Power supply 110V/220V AC
1102.1 AFP03 OUT 63 Separate Relays
For installations with frequent switching option with replaceable relays, simply replace
relays if needed in 2 s.
Power supply 110V/220V AC
1330.1 AFP LITE 7In:(4Ana,2DI,1CO) / 5 DOut EU
Additional smaller electronic unit with
5 outputs
4 analog inputs, 2 digital inputs, 1 counter input
For simple ferti units this can be combined with AFP63 units
Also often used with smaller extensions of greenhouses.
Power supply 24V AC/DC
Extra units to use in the line
new code description
1201.2 AFP Nano line repeater V2: the standard maximum distance between 2 AFP units is 120 m,
use a Nano AFP Line repeater to cross long distances
Power supply 24V AC/DC
1202.2 AFP Nano WSC11 V2: the Thies meteo station WSC11 (item number 3001.1) is a cheap reliable
general meteo station. Connecting the signals to the Greenspec system is best done with
an AFP Nano WSC11.
Power supply 24V AC/DC
1203.2 AFP Nano SHT V02( w. NTC plus SHT sensor for T and rH) no MB, Unit for measuring
temperature and humidity with Sensirion sensors on an AFP Nano
Power supply 24V AC/DC
1204.2 AFP Nano SHT V02( w. NTC plus SHT sensor for T and rH) w. ventilated housing Unit for
measuring temperature and humidity with Sensirion sensors on an AFP Nano with a
ventilated housing included
Power supply 24V AC/DC
GSC Computer
new code description
2210.1 GSC-VESPA -i3 6100-4G- W10IOT - Opto com
Power supply 110-250V AC
2220,1 GSC-Minis W10 Iot in housing IP65 with opto com
Power supply 110-250V AC
2302.1 Dongle & Software Activation full access, unlimited addition of AFP. At this moment
maximum in use = 40.
2303.1 Dongle & Soft Activation limited program for up to 2 AFP on the line
2306.1 Dongle & software activation for GSC Minis extra limited version: only fertilizer software, up
to 2 AFP in the line.
2305.1 GSC Monitor app 1 installation
2305.2 GSC Monitor app 10 installation Cheaper per 10
2326.1 Opto Com Box V04 USB POF: with this unit you can connect the AFP units with a standard
W10 computer. Practical as emergency unit in case the GSC computer fails
Spare parts and additional parts for computers 2530.1 Motherboard GSC Vespa IMB 2311.1 Opto Com for the computer GSC POF/POF, w. USB connector (without dongle) 2441.1 Hard drive with software installed, replacement only 8108.1 Keyboard Azerty logitech 8109.1 LG LCD screen 23” HDMI 1411.1 Opto COM board for the AFP electronic board POF/POF 2301.1 Dongle for Dealer Use: only for dealers, to check installations
Standard sensors supplied by Greenspec
new code descript
picture
3001.1 WSC11 ClimaSensor Digital: only the sensor, need combination with connector. Greenspec
advises combination with AFP Nano meteo
3002.1 Meteo complete: WSC11+nano+fixing: complete compact meteo station, with fixing plate and
AFP Nano connection to the optical POF cable
3003.1 Support for WSC11: mounting arm for the Thies meteo station, order with 3001.1, included in
3002.1
3140.1 Anemometer Pro2 Davis 6410: good reliable wind speed and direction measurement
3150.1 Radiation sensor CR110 Kimo 0-1500 W/m2,P: output 4-20mA: standard general radiation
sensor
3161.1 Precipitation sensor Thies: measures rain intensity with 5 light beams / sensors
3165.1 / Drain Collector / Rain counter: can be used both to measure drain water from grow beds and
4610.2 to measure rainfall quantity.
3166.1 Hydreon Rain sensor: reliable simple rain sensor. Will not be polluted because of round
polymer dome shape. Long lifetime.
4661.1 Soil Moisture Aquameter MAS-1 (4/20mA): simple humidity sensor for grow beds and potting
soil
5001.1 Temp/Humd TH110 Kimo (conn cable 20 cm) 4/20mA, standard setting 0/50°C, 0/100, can be
adjusted on order.
Shrt cabke to make easy installation in temperature / humidity installations
5101.1 CO2 Kimo CO112ANA (AR)
Greenspec EC and pH sensor for long term use and good results. Our own fitting and electronics adaptation.
new code descript
4201.1 EC IND50-4-20mA Sensor only Conductivity: no calibration required, lifetime >3 years
4202.1 EC BKIN50-4-20mA Sensor Conductivity complete with item 4242 and 4243 range 0-20mS
4203.1 EC BKIN50-4-20mA Sensor Conductivity complete with item 4242 and 4243 range 0-10mS
4204.1 EC handheld sensor
4205.1 Calibration device for EC sensors
4230.1 Adaptor PVC/EC sensor on tube glue N
4231.1 Adaptor PVC/EC sensor on tube Screw N
4232.1 Fitting for IND50 EC sensor on tube (included in 4202 and 4203)
4233.1 Screw-on Cap for IND50 EC sensor (included in 4202 and 4203)
adaptor PVC/EC sensor screw 2": for high pressure / high flow applications where EC is
4241.1 mounted in main water stream.
Fitting for IND50 2" for high pressure / high flow applications where EC is mounted in main
4242.1 water stream
Screw on cap for IND50 2" for high pressure / high flow applications where EC is mounted in
4243.1 main water stream
4401.1 pH sensor Greenspec
4402.2 Electrode pH Xylem 10 bar: high pressure electrode, Germand product, lifetime 1 yr
4403,2 Electrode pH Xylem 6 bar standard pressure electrode, German product, lifetime 1 yr
4404.1 pH Greenspec Ampli Box with electronic print
4405.1 pH Electronic print Greenspec
4406.2 PVC Support pH to screw complete
4407.2 PVC Support pH complete to glue
Additional products that are supplied by Greenspec new code descript 4611.1 Debitmeter GF 2536 4612.1 Fitting/Debitmeter GF2536 110mm-200mm 4641.1 Venturi Stubbe SP820 DN10 PVC (16mm) 4642.1 Venturi Stubbe SP820 DN15 PVC (20mm) 4643.1 Venturi Stubbe SP820 DN20 PVC (25mm) 4650.1 Air pump yellow 1.5pK 230V 4651.1 Air Distributor PVC for fertiliser tank H50 5021.1 Humidity Saline Solution 44% 5021.1 Humidity saline solution 85% 5401.1 Pressure sensor greenhouse 5501.1 Position measurement vents 6004.1 Temperature sensor NTC10K, 5m, IP68 6005.1 Temperature sensor NTC10K, 1m, IP68 6100.1 Temp sensor holder 1/2" 50mm pr capteur NTC 6101.1 Temp sensor holder 1/2" 100mm pr capteur NTC 6102.1 Temp sensor holder 1/2" 150mm pr capteur NTC
Optical fibre connection:
new code description picture
7004.1 POF Optical Fiber 500 m with Kevlar reinforcement and UV protecting mantle for max 130 m
distance use, can be installed directly in the greenhouse.
Cut with care: first remove outer protection, then cut the POF with special cutter..
On the picture: the small standard POF on the left, reinforced POF on the right.
7005.2 POF Cable 500 M unmarked for max 130 m distance use, cheaper but need external
protecting tubing. Quick and easy cutting.
7006.1 POF Cable 500 M unmarked for max 130 m distance use per meter
7009.1 POF cable with Kevlar reinforcement and UV protecting mantle for max 150 mtr distance use
per meter
7010.1 Cable HCS optical fibre per meter: high price, but can be used over 1000 m.
7015.1 POF Cutter for plastic optical fibre: use for 7005.2 and core of 7004.1: can be used for one
installationYou can also read
